 |
 |
 |
|
| The SNAPTOGGLE anchor is a heavy-duty hollow wall anchor for use in walls, ceilings, or floors of materials such as gypsum board, drywall with a wood or steel stud, concrete block, tile over drywall, wood, etc. The anchor is pre-assembled and ready for immediate use. The ratcheting strap / locking cap assembly positions the strong one-piece zinc-plated (or stainless) steel anchoring channel on the rear of the wall, capturing it snugly and securely between the anchoring channel and the cap. The remaining portion of the straps on the outside of the wall are then easily and quickly snapped off by hand at the required length, flush with the surface of the wall (no extra tools required). Holding is dependent only on a metal bolt to metal channel connection. The SNAPTOGGLE anchor complies with all existing fire codes for critical applications. |
|
|
|
|
|
 |
|
 |
|
Features
- Strong—up to 2x the load of an old-fashioned wing toggle
- Bolt is centered in channel and positioned for precise installation
- Bolt threads never touch interior surface of hole and so can’t saw through substrate
- Save time—at least 6 minutes per anchor versus wing toggles
- Can use a screw gun—anchor does not spin
- Save money—turn a 2-person job into a 1-person job
- Use a shorter bolt—no need to carrry a wing through the wall
- New, patented strap design with sturdier straps and smaller ratchet interval: adjusts more precisely and snaps off flush to wall, ceiling, or floor does not break prematurely pushes aside insulation
- Smallest installation hole for each bolt size— maintains integrity of wall, ceiling, or floor, strengthening the anchoring ends the need to patch an oversized hole [a 1/4" wing toggle requires a 3/4" diameter hole: 50% larger than the 1/2" diameter hole used by the 1/4” SNAPTOGGLE anchor]
- New plating is 7x more corrosion-resistant than B633-85 Type III/SC 1 government spec high quality zinc plating [350 hours to red rust in salt spray test versus only 48 hours for government spec]
- Pre-installs without the bolt to make handling of fixture easier
- Reusable in the same hole—remove the bolt without losing the anchor New ergonomic design—fingers grip straps more naturally and more easily with no slipping
|
|
|
 |
|
 |
|
