Exceeds Building Code Requirement! Most national and local building codes require that grab bars be able to sustain 250 pounds of dead load force. The BB 1/4"-20 SNAPTOGGLE toggle bolt substantially exceeded that requirement, holding 360 pounds in 1/2" drywall in tests conducted by the Cornell University / Joan and Sanford I. Weill Medical College / Gerontological Environmental Modifications unit and the Eastern Paralyzed Veteran's Association in the EPVA's lab in Fort Totten, New York, in April 2002. The SNAPTOGGLE toggle bolt [called the "Toggler Bolt" in these tests] was the only anchor that met this requirement when tested in drywall alone!
WHY ARE THEY BETTER THAN CONVENTIONAL ANCHORS?
Attributes of TOGGLER brand toggle bolts that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...
Cost-effective: Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
Strongest toggle bolt in smallest hole
Convenient: Allow removal of bolt or fixture without anchor falling behind wall.
Most reliable: Will not damage or break through wall even when vibrated.
Easy to Use: Pre-install without bolt.
Accurate: Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion—and bolt won't sag.
Quick: Can be used with a screw gun—anchor won't spin in hole.
